China Zkldf100 Axial Angular Contact Ball Bearings Rotary Table Bearings 100*185*38mm bearing air

Product Description

ZKLDF100 Axial angular contact ball bearings rotary table bearings 100*185*38mm

YRT bearing

ZKLDF are low-friction ,high accuracy for very high speeds,high axial and radial loads and high demands on tilting rigidity . these bearings are particularly suitable for precision applications involving combined loads.their preferred areas of use are bearing arrangements in rotary tables and honing heads as measurement and testing equipment.

Bearing characteristics:
1. High precision: P4 precision, P2 precision
2. High rigidity: This series bearing have preload
3. High load:This series bearing can bear double-direction axial load, radial load and tilting moment
4. Small size: This series bearing can save space for machine tools

APPLICATION:
widely used on high precision rotary table, robot joints, rotating units, sophisticated medical equipments, and measurement instruments.

Bearing Type Dimension The fixing hole
d D H H1 D1 D2 D3 J J1 a Inner ring Outer ring
Unit:mm d1 d2 3)
QTY3)
d3 3)
QTY3)
mm mm
ZKLDF100 100 185 38 25 160 136 158 112 170 5.4 5.6 10 16 5.6 15
ZKLDF120 120 210 40 26 184 159 161 135 195 6.2 7 11 22 7 21
ZKLDF150 150 240 40 26 214 188 211 165 225 6.2 7 11 34 7 33
ZKLDF200 200 300 45 30 274 243 271 215 285 6.2 7 11 46 7 45
ZKLDF260 260 385 55 36.5 345 313 348 280 365 8.2 9.3 15 34 9.3 33
ZKLDF325 325 450 60 40 415 380 413 342 430 8.2 9.3 15 34 9.3 33
ZKLDF395 395 525 65 42.5 486 450 488 415 505 8.2 9.3 15 46 9.3 45
ZKLDF460 460 600 70 46 560 520 563 482 580 8.2 9.3 15 46 9.3 45
ZKLDF580 580 750 90 60 702 656 700 610 720 11 11.4 18 45 11.4 42

 

Screw connection
QTY
Connect screw holes 1)
Pitch1)
t
Tightening torque of screw Basic rated load 4)
Limited speed4)
Bearing friction torque Weight Type
Axial
Dynamic Static
MA2) Ca Coa Grease lubrication
G   Xt Nm kN r/min Nm ≈Kg
2 M5 3 18×20° 8.5 67 251 2800 1.6 4.5 ZKLDF100
2 M8 3 24×15° 14 72 315 2400 2 6 ZKLDF120
2 M8 3 36×10° 14 76 365 2000 3 7.5 ZKLDF150
2 M8 3 48×7.5° 14 112 550 1600 4.5 11 ZKLDF200
2 M12 3 36×10° 34 155 920 1200 7.5 22 ZKLDF260
2 M12 3 36×10° 34 165 1110 1000 11 28 ZKLDF325
2 M12 3 48×7.5° 34 214 1470 800 16 39 ZKLDF395
2 M12 3 48×7.5° 34 255 1860 700 21 50 ZKLDF460
3 M12 6 48×7.5° 68 395 3180 500 40 82 ZKLDF580

Product Process

About Us:
HangZhou MC Bearing Technology Co.,Ltd (LYMC),who is manufacture located in bearing zone, focus on Slewing bearing, cross roller bearing and pinion,Dia from 50mm-8000mm, Our team with technical and full experience in the bearing industry.
*Professional in researching, developing, producing & marketing high precision bearings for 16 years;
*Many series bearings are on stock; Factory directly provide, most competitive price;
*Advanced CNC equipment, guarantee product accuracy & stability;
*One stop purchasing, product include cross roller bearing, rotary table bearing, robotic bearing, slewing bearing, angular contact ball bearing, large and extra large custom made bearing, diameter from 50~9000mm;
*Excellent pre-sale & after sale service. We can go to customers’ project site if needed.
*Professional technical & exporting team ensure excellent product design, quotation, delivering, documentation & custom clearance.

Our Service:

FAQ:
1.Q: Are you trading company or manufacturer ?
A: We are professional slewing bearing manufacturer with 20 years’ experience.
2.Q: How long is your delivery time?
A: Generally it is 4-5 days if the goods are in stock. or it is 45 days if the goods are not in
stock, Also it is according to quantity.
3.Q: Do you provide samples ? is it free or extra ?
A: Yes, we could offer the sample, it is extra.
4.Q: What is your terms of payment ?
A: 30% T/T in advance, 70% balance before shipment.
5.Q: Can you provide special customization according to the working conditions?
A: Sure, we can design and produce the slewing bearings for different working conditions.
6.Q: How about your guarantee?
A: We provide lifelong after-sales technical servic

Rolling Body: Roller Bearings
The Number of Rows: Single
Outer Dimension: Small and Medium-Sized (60-115mm)
Material: Gcr15
Spherical: Non-Aligning Bearings
Load Direction: Axial Bearing

###

Samples:
US$ 300/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Bearing Type Dimension The fixing hole
d D H H1 D1 D2 D3 J J1 a Inner ring Outer ring
Unit:mm d1 d2 3)
QTY3)
d3 3)
QTY3)
mm mm
ZKLDF100 100 185 38 25 160 136 158 112 170 5.4 5.6 10 16 5.6 15
ZKLDF120 120 210 40 26 184 159 161 135 195 6.2 7 11 22 7 21
ZKLDF150 150 240 40 26 214 188 211 165 225 6.2 7 11 34 7 33
ZKLDF200 200 300 45 30 274 243 271 215 285 6.2 7 11 46 7 45
ZKLDF260 260 385 55 36.5 345 313 348 280 365 8.2 9.3 15 34 9.3 33
ZKLDF325 325 450 60 40 415 380 413 342 430 8.2 9.3 15 34 9.3 33
ZKLDF395 395 525 65 42.5 486 450 488 415 505 8.2 9.3 15 46 9.3 45
ZKLDF460 460 600 70 46 560 520 563 482 580 8.2 9.3 15 46 9.3 45
ZKLDF580 580 750 90 60 702 656 700 610 720 11 11.4 18 45 11.4 42

###

Screw connection
QTY
Connect screw holes 1)
Pitch1)
t
Tightening torque of screw Basic rated load 4)
Limited speed4)
Bearing friction torque Weight Type
Axial
Dynamic Static
MA2) Ca Coa Grease lubrication
G   Xt Nm kN r/min Nm Kg
2 M5 3 18×20° 8.5 67 251 2800 1.6 4.5 ZKLDF100
2 M8 3 24×15° 14 72 315 2400 2 6 ZKLDF120
2 M8 3 36×10° 14 76 365 2000 3 7.5 ZKLDF150
2 M8 3 48×7.5° 14 112 550 1600 4.5 11 ZKLDF200
2 M12 3 36×10° 34 155 920 1200 7.5 22 ZKLDF260
2 M12 3 36×10° 34 165 1110 1000 11 28 ZKLDF325
2 M12 3 48×7.5° 34 214 1470 800 16 39 ZKLDF395
2 M12 3 48×7.5° 34 255 1860 700 21 50 ZKLDF460
3 M12 6 48×7.5° 68 395 3180 500 40 82 ZKLDF580

###

Rolling Body: Roller Bearings
The Number of Rows: Single
Outer Dimension: Small and Medium-Sized (60-115mm)
Material: Gcr15
Spherical: Non-Aligning Bearings
Load Direction: Axial Bearing

###

Samples:
US$ 300/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Bearing Type Dimension The fixing hole
d D H H1 D1 D2 D3 J J1 a Inner ring Outer ring
Unit:mm d1 d2 3)
QTY3)
d3 3)
QTY3)
mm mm
ZKLDF100 100 185 38 25 160 136 158 112 170 5.4 5.6 10 16 5.6 15
ZKLDF120 120 210 40 26 184 159 161 135 195 6.2 7 11 22 7 21
ZKLDF150 150 240 40 26 214 188 211 165 225 6.2 7 11 34 7 33
ZKLDF200 200 300 45 30 274 243 271 215 285 6.2 7 11 46 7 45
ZKLDF260 260 385 55 36.5 345 313 348 280 365 8.2 9.3 15 34 9.3 33
ZKLDF325 325 450 60 40 415 380 413 342 430 8.2 9.3 15 34 9.3 33
ZKLDF395 395 525 65 42.5 486 450 488 415 505 8.2 9.3 15 46 9.3 45
ZKLDF460 460 600 70 46 560 520 563 482 580 8.2 9.3 15 46 9.3 45
ZKLDF580 580 750 90 60 702 656 700 610 720 11 11.4 18 45 11.4 42

###

Screw connection
QTY
Connect screw holes 1)
Pitch1)
t
Tightening torque of screw Basic rated load 4)
Limited speed4)
Bearing friction torque Weight Type
Axial
Dynamic Static
MA2) Ca Coa Grease lubrication
G   Xt Nm kN r/min Nm Kg
2 M5 3 18×20° 8.5 67 251 2800 1.6 4.5 ZKLDF100
2 M8 3 24×15° 14 72 315 2400 2 6 ZKLDF120
2 M8 3 36×10° 14 76 365 2000 3 7.5 ZKLDF150
2 M8 3 48×7.5° 14 112 550 1600 4.5 11 ZKLDF200
2 M12 3 36×10° 34 155 920 1200 7.5 22 ZKLDF260
2 M12 3 36×10° 34 165 1110 1000 11 28 ZKLDF325
2 M12 3 48×7.5° 34 214 1470 800 16 39 ZKLDF395
2 M12 3 48×7.5° 34 255 1860 700 21 50 ZKLDF460
3 M12 6 48×7.5° 68 395 3180 500 40 82 ZKLDF580

###

The Benefits of Using Self-Lubricating Bushings for Your Next Pivot

Like any other auto part, control arm bushings wear out over time. This results in an increase in irritating vibrations that can be dangerous in severe cases. The bushings in the control arms also wear out due to the stress that extreme driving conditions put on the control arms. Additionally, environmental factors and oversized tires tend to transmit more vibration through the bushing than conventionally sized tires. Whatever the cause, bushings can be the source of many problems.
bushing

wear and cracking

The main cause of dry valve side bushing cracking is a mismatch in thermal expansion of the core and flange. This situation can seriously compromise the safety of the power system. To improve the safety of dry valve side bushings, the crack development of epoxy impregnated paper under various conditions was investigated. A coupled thermomechanical simulation model was also used to study the cracking process.
The first step in diagnosing the cause of bushing wear and cracking is a visual inspection. The bushing of the lower control arm is fixed to the frame by a bracket. If there are any visible cracks, it’s time to replace the bushing. However, there is no need to replace the entire suspension. In some cases, worn bushings can cause a variety of problems, including body lean, excessive tire wear and cornering noise.

Maintenance free

If you’re considering maintenance-free bushings for your next pivot, you’ll be wondering what to look for in these components. The bushing protects the housing from corrosion and keeps the bushing under pressure. However, many users are not familiar with what these components can do for their applications. In this article, we’ll look at several examples of truly maintenance-free pivots and discuss their requirements.
One of the most popular types of maintenance-free bushings are flanged and parallel. Unlike worm gear bushings, these self-lubricating metal bearings are ideal for a variety of applications and conditions. They reduce failure and downtime costs while providing the long-term lubrication required by other types of bushings. Since these sleeves are made of lead-free material, they are RoHS compliant, which means they are environmentally friendly.Another common maintenance-free bushing is plastic. This material is easier to find off-the-shelf and relatively inexpensive to produce. However, it is not suitable for high load applications as it will crack under heavy loads and damage mating parts. Plastics can also deviate if the manufacturing process is imprecise. Plastic bushings can also crack when subjected to high loads.
bushing

self-lubricating

When using a self-lubricating bushing, there is no need to apply grease to the bushing. Oily liquids tend to attract dirt and grit, which can wear away the graphite prematurely. By eliminating the need for regular lubrication, you will reduce equipment maintenance costs. This article will explore the benefits of self-lubricating bushings. You will love your kindness.
Self-lubricating bushings have a strong base material to withstand radial bearing pressure while providing shaft support at the contact surfaces. The material also has good fatigue properties and low friction motion. Self-lubricating bushings can be used in environments with high temperatures and aggressive media. These products can also withstand enormous pressure. When using self-lubricating bushings, it is important to select the correct material.
The main advantage of using self-lubricating bushings is ease of maintenance. They don’t require oil to run and are cheaper to buy. Their main benefit is that they can significantly reduce your machine running costs. These bearings do not require oiling operations, reducing maintenance costs. These bearings also offer a simplified mechanical design due to their thin walls and high load capacity. In addition, they reduce noise levels while maintaining excellent wear resistance. Plus, their materials are ROHS compliant, which means they don’t require oil.
Hydropower installations are another area where self-lubricating bushings have proven their advantages. They reduce maintenance costs, extend equipment life, and improve environmental benefits. For example, the Newfoundland Power Company uses self-lubricating bushings in the gates of its hydroelectric power plants. These self-lubricating bushings eliminate grease from entering waterways and tailraces. As a result, power companies are able to reduce maintenance and costs.

compared to cartilage in the human body

What is the difference between tendon, bone and cartilage? Human cartilage is composed of collagen and elastic fibers. In contrast, fibrocartilage contains more collagen than hyaline cartilage. Both cartilage types are composed of proteoglycans, which have a protein backbone and glycosaminoglycan side chains. These components work together to provide structure and flexibility to the cartilage.
Bone is a combination of living and dead cells embedded in a matrix. The outer hard layer of bone is dense bone, and the inner layer is spongy, containing bone marrow, blood vessels, nerves, etc. Bone contains both organic and inorganic substances, and this process of hardening of the matrix produces bone. On the other hand, cartilage consists of chondrocytes and a matrix composed of collagen and elastin fibers. Compared to bone, cartilage is yellow and contains elastic fibers.
Although bone and cartilage are structurally identical, cartilage is more flexible. It is mainly found in the joints and respiratory system and requires flexibility. Its ingredients include collagen and proteoglycans, which provide compression and abrasion resistance. Furthermore, connective tissue is composed of cells, fibers and matrix.
The basic substance of cartilage is chondroitin sulfate, which is derived from animals. Although cartilage grows more slowly than bone, its microstructure is less organized. There is a fibrous sheath covering the cartilage, called the perichondrium. The molecular composition of the ECM plays an important role in the function of cartilage. The collagen matrix is ​​important for cartilage remodeling and consists of changes in the collagen matrix.
bushing

Compared to metal-on-bone contact

Both metal-on-bone contact are known to cause a significant increase in the pressures in a joint. To compare the two, we first calculated the joint contact pressures in each model and compared them. The results of this study support previous research on this subject. The following sections discuss the benefits of both types of contact. They also outline some key differences between the two.

China Zkldf100 Axial Angular Contact Ball Bearings Rotary Table Bearings 100*185*38mm     bearing airChina Zkldf100 Axial Angular Contact Ball Bearings Rotary Table Bearings 100*185*38mm     bearing air
editor by czh 2022-11-28

Tapered Roller Bearing

As one of the leading tapered roller bearing manufacturers, suppliers, and exporters of mechanical products, We offer tapered roller bearing and many other products.

Please get in touch with us for details.

Mail:[email protected]

Manufacturer supplier exporter of tapered roller bearing.

Recent Posts