China Electric Scooter/Bicycle Ball Bearing Miniature/Thin Wall 6200 6900 6800 bearing driver kit

Product Description

Product Description

Model Deep Groove Ball Bearing
Size All models
Material Chrome Steel (Gcr15) + G16
Noise Level Z1, Z2, Z3, Z4
Clearance C0,CM,C3,C4,C2

Product Parameters

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
683 3 0.1181  7 0.2756  2 0.0787  3 0.1181  0.1 0.004  420 135 0.571 
684 4 0.1575  9 0.3543  2.5 0.0984  4 0.1575  0.1 0.004  480 170 0.571 
685 5 0.1969  11 0.4331  3 0.1181  5 0.1969  0.15 0.006  770 320 0.0019 
686 6 0.2362  13 0.5118  3.5 0.1378  5 0.1969  0.15 0.006  1080 440 0.0571 
687 7 0.2756  14 0.5512  3.5 0.1378  5 0.1969  0.15 0.006  1170 510 0.0030 
688 8 0.3150  16 0.6299  4 0.1575  5 0.1969  0.2 0.008  1250 590 0.0038 
689 9 0.3543  17 0.6693  4 0.1575  5 0.1969  0.2 0.008  1330 660 0.0440 
6800 10 0.3937  19 0.7480  5 0.1969  5 0.1969  0.3 0.012  1590 750 0.0050 
6801 12 0.4724  21 0.8268  5 0.1969  5 0.1969  0.3 0.012  1910 1040 0.0060 
6802 15 0.5906  24 0.9449  5 0.1969  5 0.1969  0.3 0.012  2070 1250 0.0070 
6803 17 0.6693  26 1.5716  5 0.1969  5 0.1969  0.3 0.012  2130 1360 0.0080 
6804 20 0.7874  32 1.2598  7 0.2756  7 0.2756  0.3 0.012  3480 2230 0.0190 
6805 25 0.9843  37 1.4567  7 0.2756  7 0.2756  0.3 0.012  3680 2630 0.5710 
6806 30 1.1811  42 1.6535  7 0.2756  7 0.2756  0.3 0.012  4000 3150 0.0260 
6807 35 1.3780  47 1.8504  7 0.2756  7 0.2756  0.3 0.012  4270 3600 0.5710 
6808 40 1.5748  52 2.571  7 0.2756  7 0.2756  0.3 0.012  4410 3890 0.0330 
6809 45 1.7717  58 2.2835  7 0.2756  7 0.2756  0.3 0.012  4590 4330 0.0400 
6810 50 1.9685  65 2.5591  7 0.2756  7 0.2756  0.3 0.012  6610 6080 0.0520 
6811 55 2.1654  72 2.3846  9 0.3543  9 0.3543  0.3 0.012  8530 8080 0. 0571  
6812 60 2.3622  78 3.0709  10 0.3937  10 0.3937  0.3 0.012  9200 8760 0.1060 
6813 65 2.5591  85 3.3465  10 0.3937  10 0.3937  0.6 0.571  1571 9420 0.1250 
6814 70 2.7559  90 3.5433  10 0.3937  10 0.3937  0.6 0.571  1571 10090 0.1350 
6815 75 2.9528  95 3.7402  10 0.3937  10 0.3937  0.6 0.571  11230 1571 0.1450 
6816 80 3.1496  100 3.9370  10 0.3937  10 0.3937  0.6 0.571  11320 11080 0.1550 
6817 85 3.3465  110 4.3307  13 0.5118  13 0.5118  1 0.039  17599 18300 0.2650 
6818 90 3.5433  115 4.5276  13 0.5118  13 0.5118  1 0.039  17853 18961 0.2800 
No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
6819 95 3.7402  120 4.7244  13 0.5118  13 0.5118  1 0.0390  18089 19616 0.2980 
6820 100 3.9370  125 4.9213  13 0.5118  13 0.5118  1 0.0390  18340 20266 0.3110 
6821 105 4.1339  130 5.1181  13 0.5118  13 0.5118  1 0.0390  18912 20924 0.3250 
6822 110 4.3307  140 5.5118  16 0.6299  16 0.6299  1 0.0390  28100 30700 0.5100 
6824 120 4.7244  150 5.9055  16 0.6299  16 0.6299  1 0.0390  28900 32900 0.5490 
6826 130 5.1181  165 6.4961  18 0.7087  18 0.7087  1.1 0.0430  37900 42900 0.7900 
6828 140 5.1181  175 6.8898  18 0.7087  18 0.7087  1 0. 0571   38200 44300 0.9900 
6830 150 5.9055  190 7.4803  20 0.7874  20 0.7874  1 0. 0571   49100 57100 1.5000 
6832 160 6.2992  200 7.8740  20 0.7874  20 0.7874  1 0. 0571   49600 59100 1.7000 
6834 170 6.6929  215 8.4646  22 0.8661  22 0.8661  1 0. 0571   61500 73300 1.9000 
6836 180 7.0866  225 8.8582  22 0.8661  22 0.8661  1 0. 0571   62300 75900 2.0000 
6838 190 7.4803  240 9.4480  24 0.9449  24 0.9449  1.5 0.0590  75100 91600 2.1000 
6840 200 7.8740  250 9.8425  24 0.9449  24 0.9449  1.5 0.0590  74200 91200 2.3800 
6844 220 8.6614  270 10.6299  24 0.9499  1.5 0.0590  76400 97800 2.7900 
6848 240 9.4488  300 11.8110  28 1.1571  2 0.0787  83500 108000 4.5000 
6852 260 10.2362  320 12.5984  28 1.1571  2 0.0787  95000 128000 4.8500 
6856 280 11.5716  350 13.7795  33 1.2992  2 0.0787  135000 178000 7.6000 
6860 300 11.8110  380 14.9606  38 1.4960  2 0.0787  162000 222000 11.0000 
6864 320 12.5984  400 15.7480  38 1.4960  2 0.0787  168000 235000 12.0000 
6872 360 14.1732  440 17.3228  38 1.4960  2.5 0.0984  12.2000 
6876 380 14.9606  480 18.8976  46 1.8110  2.5 0.0984  168000 235000 20.5000 
6880 400 15.7480  500 19.6850  46 1.8110  2.5 0.0984  21.7000 
6884 420 16.5354  520 20.4724  46 1.8110  2.5 0.1377  251000 425000 22.0000 
6888 440 17.3228  540 21.2598  46 1.8110  2.5 0.0984  24.0000 
6892 460 18.1102  580 22.8346  56 2.2047  3 0.1181  33.5000 

Certifications

Packaging & Shipping

Packaging Details
1.plastic tube + carton box + woven bag + pallet
2.Can be based on customer requires

Company Profile

Ltd. is located in No.93 North Yangmei Avenue, Henghe Town, HangZhou City, ZHangZhoug Province, which is known as the “Kingdom of Bearings”. Under the jurisdiction of Jiewei Bearing Factory, Jiechuang Bearing Factory and Jiewang Bearing Factory.

The 3 factories together cover an area of 12,000 square meters, with a construction area of 16,000 square meters. With 48 automatic production lines, the annual output value is more than 100 million yuan.

After years of technology and market accumulation, the products have gained a certain popularity and influence in the industry. Jiewei bearing in the spirit of always responsible for the customer’s original intention, to seriously do everything, and constantly improve the quality of products, improve the quality of service, with sincerity, confidence, responsibility for the purpose of service to win trust, win the future!
 

Production capacity

 

High-end products production line, each line daily output of about 6000 sets, the output value of 6000 yuan, with 12 high-end production lines.

JIEWANG Bearing Factory produces motor bearings and power tool bearings mainly in 60, 62 and 63 series, with 14 production lines, mainly for end-supporting, according to the size of the model, the average volume is 6000-8000 sets.

JIEWEI Bearing Factory has 22 production lines for the mid-range miniature and thin-walled series, with 12 lines for bore diameter below 17MM, and the average daily output is about 8000 sets, and 10 lines for thin-walled series, with the average production value of 2400 sets for bore diameter 10-50. For the aperture above 50, it is about 800-1300 sets.

FAQ

1. WHO ARE CZPT BEARING?
  We are based in ZHangZhoug, China, start from 2000,sell to Mid East(30.00%), Eastern Europe(20.00%), Domestic Market(15.00%), South                  Asia(10.00%), North America(10.00%), Southeast Asia(10.00%), South America(5.00%)

  There are total about 11-50 people in our office.

2. HOW CAN WE GUARANTEE QUALITY?
Always a pre-production sample before mass production;
Always final Inspection before shipment;

3. WHAT CAN YOU BUY FROM US?
Deep Groove Ball Bearings, Spherical Roller Bearings, Cylindrical Roller Bearings, Tapered Roller Bearings and Ceramic Bearings.

Specilizing In Thin Wall Bearing, Micro-Bearing, Miniature Bearings, Inch bearings

4. WHY SHOULD YOU BUY FROM US NOT FROM OTHER SUPPLIERS?
HangZhou CZPT Bearing Co., Ltd was founded in 2000 , has been doing deep groove bearing domestic business already for 22 years with own logo “JVB”,  so that has a good reputation in China and close coorparation factories to make sure stable quality.

5. WHAT SERVICES CAN WE PROVIDE?
Accepted Delivery Terms: FOB,CFR,CIF;
Accepted Payment Currency: USD,CNY;
Accepted Payment Type: T/T,L/C,D/P D/A,MoneyGram,Credit Card,PayPal,Western Union,Cash,Escrow;
Language Spoken: English,Chinese

Application

Specific applications of deep groove ball bearings.
Aircraft models, remote control cars, machine tools, motors, pumps, agricultural machinery, textile machinery, laser printers, instruments, measuring instruments, electronic parts, etc.

US $0.3
/ Piece
|
10 Pieces

(Min. Order)

###

Contact Angle: 15-60°
Aligning: Aligning Bearing
Separated: Separated
Rows Number: Single
Load Direction: Radial Bearing
Material: Bearing Steel

###

Samples:
US$ 0.3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Deep Groove Ball Bearing
Size All models
Material Chrome Steel (Gcr15) + G16
Noise Level Z1, Z2, Z3, Z4
Clearance C0,CM,C3,C4,C2

###

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
683 3 0.1181  7 0.2756  2 0.0787  3 0.1181  0.1 0.004  420 135 0.0010 
684 4 0.1575  9 0.3543  2.5 0.0984  4 0.1575  0.1 0.004  480 170 0.0010 
685 5 0.1969  11 0.4331  3 0.1181  5 0.1969  0.15 0.006  770 320 0.0019 
686 6 0.2362  13 0.5118  3.5 0.1378  5 0.1969  0.15 0.006  1080 440 0.0027 
687 7 0.2756  14 0.5512  3.5 0.1378  5 0.1969  0.15 0.006  1170 510 0.0030 
688 8 0.3150  16 0.6299  4 0.1575  5 0.1969  0.2 0.008  1250 590 0.0038 
689 9 0.3543  17 0.6693  4 0.1575  5 0.1969  0.2 0.008  1330 660 0.0440 
6800 10 0.3937  19 0.7480  5 0.1969  5 0.1969  0.3 0.012  1590 750 0.0050 
6801 12 0.4724  21 0.8268  5 0.1969  5 0.1969  0.3 0.012  1910 1040 0.0060 
6802 15 0.5906  24 0.9449  5 0.1969  5 0.1969  0.3 0.012  2070 1250 0.0070 
6803 17 0.6693  26 1.0236  5 0.1969  5 0.1969  0.3 0.012  2130 1360 0.0080 
6804 20 0.7874  32 1.2598  7 0.2756  7 0.2756  0.3 0.012  3480 2230 0.0190 
6805 25 0.9843  37 1.4567  7 0.2756  7 0.2756  0.3 0.012  3680 2630 0.0220 
6806 30 1.1811  42 1.6535  7 0.2756  7 0.2756  0.3 0.012  4000 3150 0.0260 
6807 35 1.3780  47 1.8504  7 0.2756  7 0.2756  0.3 0.012  4270 3600 0.0290 
6808 40 1.5748  52 2.0472  7 0.2756  7 0.2756  0.3 0.012  4410 3890 0.0330 
6809 45 1.7717  58 2.2835  7 0.2756  7 0.2756  0.3 0.012  4590 4330 0.0400 
6810 50 1.9685  65 2.5591  7 0.2756  7 0.2756  0.3 0.012  6610 6080 0.0520 
6811 55 2.1654  72 2.3846  9 0.3543  9 0.3543  0.3 0.012  8530 8080 0.0830 
6812 60 2.3622  78 3.0709  10 0.3937  10 0.3937  0.3 0.012  9200 8760 0.1060 
6813 65 2.5591  85 3.3465  10 0.3937  10 0.3937  0.6 0.024  10510 9420 0.1250 
6814 70 2.7559  90 3.5433  10 0.3937  10 0.3937  0.6 0.024  10890 10090 0.1350 
6815 75 2.9528  95 3.7402  10 0.3937  10 0.3937  0.6 0.024  11230 10760 0.1450 
6816 80 3.1496  100 3.9370  10 0.3937  10 0.3937  0.6 0.024  11320 11080 0.1550 
6817 85 3.3465  110 4.3307  13 0.5118  13 0.5118  1 0.039  17599 18300 0.2650 
6818 90 3.5433  115 4.5276  13 0.5118  13 0.5118  1 0.039  17853 18961 0.2800 
No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
6819 95 3.7402  120 4.7244  13 0.5118  13 0.5118  1 0.0390  18089 19616 0.2980 
6820 100 3.9370  125 4.9213  13 0.5118  13 0.5118  1 0.0390  18340 20266 0.3110 
6821 105 4.1339  130 5.1181  13 0.5118  13 0.5118  1 0.0390  18912 20924 0.3250 
6822 110 4.3307  140 5.5118  16 0.6299  16 0.6299  1 0.0390  28100 30700 0.5100 
6824 120 4.7244  150 5.9055  16 0.6299  16 0.6299  1 0.0390  28900 32900 0.5490 
6826 130 5.1181  165 6.4961  18 0.7087  18 0.7087  1.1 0.0430  37900 42900 0.7900 
6828 140 5.1181  175 6.8898  18 0.7087  18 0.7087  1 0.0393  38200 44300 0.9900 
6830 150 5.9055  190 7.4803  20 0.7874  20 0.7874  1 0.0393  49100 57100 1.5000 
6832 160 6.2992  200 7.8740  20 0.7874  20 0.7874  1 0.0393  49600 59100 1.7000 
6834 170 6.6929  215 8.4646  22 0.8661  22 0.8661  1 0.0393  61500 73300 1.9000 
6836 180 7.0866  225 8.8582  22 0.8661  22 0.8661  1 0.0393  62300 75900 2.0000 
6838 190 7.4803  240 9.4480  24 0.9449  24 0.9449  1.5 0.0590  75100 91600 2.1000 
6840 200 7.8740  250 9.8425  24 0.9449  24 0.9449  1.5 0.0590  74200 91200 2.3800 
6844 220 8.6614  270 10.6299  24 0.9499  1.5 0.0590  76400 97800 2.7900 
6848 240 9.4488  300 11.8110  28 1.1023  2 0.0787  83500 108000 4.5000 
6852 260 10.2362  320 12.5984  28 1.1023  2 0.0787  95000 128000 4.8500 
6856 280 11.0236  350 13.7795  33 1.2992  2 0.0787  135000 178000 7.6000 
6860 300 11.8110  380 14.9606  38 1.4960  2 0.0787  162000 222000 11.0000 
6864 320 12.5984  400 15.7480  38 1.4960  2 0.0787  168000 235000 12.0000 
6872 360 14.1732  440 17.3228  38 1.4960  2.5 0.0984  12.2000 
6876 380 14.9606  480 18.8976  46 1.8110  2.5 0.0984  168000 235000 20.5000 
6880 400 15.7480  500 19.6850  46 1.8110  2.5 0.0984  21.7000 
6884 420 16.5354  520 20.4724  46 1.8110  2.5 0.1377  251000 425000 22.0000 
6888 440 17.3228  540 21.2598  46 1.8110  2.5 0.0984  24.0000 
6892 460 18.1102  580 22.8346  56 2.2047  3 0.1181  33.5000 
US $0.3
/ Piece
|
10 Pieces

(Min. Order)

###

Contact Angle: 15-60°
Aligning: Aligning Bearing
Separated: Separated
Rows Number: Single
Load Direction: Radial Bearing
Material: Bearing Steel

###

Samples:
US$ 0.3/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:

###

Model Deep Groove Ball Bearing
Size All models
Material Chrome Steel (Gcr15) + G16
Noise Level Z1, Z2, Z3, Z4
Clearance C0,CM,C3,C4,C2

###

No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
683 3 0.1181  7 0.2756  2 0.0787  3 0.1181  0.1 0.004  420 135 0.0010 
684 4 0.1575  9 0.3543  2.5 0.0984  4 0.1575  0.1 0.004  480 170 0.0010 
685 5 0.1969  11 0.4331  3 0.1181  5 0.1969  0.15 0.006  770 320 0.0019 
686 6 0.2362  13 0.5118  3.5 0.1378  5 0.1969  0.15 0.006  1080 440 0.0027 
687 7 0.2756  14 0.5512  3.5 0.1378  5 0.1969  0.15 0.006  1170 510 0.0030 
688 8 0.3150  16 0.6299  4 0.1575  5 0.1969  0.2 0.008  1250 590 0.0038 
689 9 0.3543  17 0.6693  4 0.1575  5 0.1969  0.2 0.008  1330 660 0.0440 
6800 10 0.3937  19 0.7480  5 0.1969  5 0.1969  0.3 0.012  1590 750 0.0050 
6801 12 0.4724  21 0.8268  5 0.1969  5 0.1969  0.3 0.012  1910 1040 0.0060 
6802 15 0.5906  24 0.9449  5 0.1969  5 0.1969  0.3 0.012  2070 1250 0.0070 
6803 17 0.6693  26 1.0236  5 0.1969  5 0.1969  0.3 0.012  2130 1360 0.0080 
6804 20 0.7874  32 1.2598  7 0.2756  7 0.2756  0.3 0.012  3480 2230 0.0190 
6805 25 0.9843  37 1.4567  7 0.2756  7 0.2756  0.3 0.012  3680 2630 0.0220 
6806 30 1.1811  42 1.6535  7 0.2756  7 0.2756  0.3 0.012  4000 3150 0.0260 
6807 35 1.3780  47 1.8504  7 0.2756  7 0.2756  0.3 0.012  4270 3600 0.0290 
6808 40 1.5748  52 2.0472  7 0.2756  7 0.2756  0.3 0.012  4410 3890 0.0330 
6809 45 1.7717  58 2.2835  7 0.2756  7 0.2756  0.3 0.012  4590 4330 0.0400 
6810 50 1.9685  65 2.5591  7 0.2756  7 0.2756  0.3 0.012  6610 6080 0.0520 
6811 55 2.1654  72 2.3846  9 0.3543  9 0.3543  0.3 0.012  8530 8080 0.0830 
6812 60 2.3622  78 3.0709  10 0.3937  10 0.3937  0.3 0.012  9200 8760 0.1060 
6813 65 2.5591  85 3.3465  10 0.3937  10 0.3937  0.6 0.024  10510 9420 0.1250 
6814 70 2.7559  90 3.5433  10 0.3937  10 0.3937  0.6 0.024  10890 10090 0.1350 
6815 75 2.9528  95 3.7402  10 0.3937  10 0.3937  0.6 0.024  11230 10760 0.1450 
6816 80 3.1496  100 3.9370  10 0.3937  10 0.3937  0.6 0.024  11320 11080 0.1550 
6817 85 3.3465  110 4.3307  13 0.5118  13 0.5118  1 0.039  17599 18300 0.2650 
6818 90 3.5433  115 4.5276  13 0.5118  13 0.5118  1 0.039  17853 18961 0.2800 
No. Size Rated load Weight
Inner Diameter Out Diameter Width (B) Chamfering Dynamic Static
d D Open Type Shielded Type rsmin (r) Cr Cr Close
mm inch mm inch mm inch mm inch mm inch N N KG
6819 95 3.7402  120 4.7244  13 0.5118  13 0.5118  1 0.0390  18089 19616 0.2980 
6820 100 3.9370  125 4.9213  13 0.5118  13 0.5118  1 0.0390  18340 20266 0.3110 
6821 105 4.1339  130 5.1181  13 0.5118  13 0.5118  1 0.0390  18912 20924 0.3250 
6822 110 4.3307  140 5.5118  16 0.6299  16 0.6299  1 0.0390  28100 30700 0.5100 
6824 120 4.7244  150 5.9055  16 0.6299  16 0.6299  1 0.0390  28900 32900 0.5490 
6826 130 5.1181  165 6.4961  18 0.7087  18 0.7087  1.1 0.0430  37900 42900 0.7900 
6828 140 5.1181  175 6.8898  18 0.7087  18 0.7087  1 0.0393  38200 44300 0.9900 
6830 150 5.9055  190 7.4803  20 0.7874  20 0.7874  1 0.0393  49100 57100 1.5000 
6832 160 6.2992  200 7.8740  20 0.7874  20 0.7874  1 0.0393  49600 59100 1.7000 
6834 170 6.6929  215 8.4646  22 0.8661  22 0.8661  1 0.0393  61500 73300 1.9000 
6836 180 7.0866  225 8.8582  22 0.8661  22 0.8661  1 0.0393  62300 75900 2.0000 
6838 190 7.4803  240 9.4480  24 0.9449  24 0.9449  1.5 0.0590  75100 91600 2.1000 
6840 200 7.8740  250 9.8425  24 0.9449  24 0.9449  1.5 0.0590  74200 91200 2.3800 
6844 220 8.6614  270 10.6299  24 0.9499  1.5 0.0590  76400 97800 2.7900 
6848 240 9.4488  300 11.8110  28 1.1023  2 0.0787  83500 108000 4.5000 
6852 260 10.2362  320 12.5984  28 1.1023  2 0.0787  95000 128000 4.8500 
6856 280 11.0236  350 13.7795  33 1.2992  2 0.0787  135000 178000 7.6000 
6860 300 11.8110  380 14.9606  38 1.4960  2 0.0787  162000 222000 11.0000 
6864 320 12.5984  400 15.7480  38 1.4960  2 0.0787  168000 235000 12.0000 
6872 360 14.1732  440 17.3228  38 1.4960  2.5 0.0984  12.2000 
6876 380 14.9606  480 18.8976  46 1.8110  2.5 0.0984  168000 235000 20.5000 
6880 400 15.7480  500 19.6850  46 1.8110  2.5 0.0984  21.7000 
6884 420 16.5354  520 20.4724  46 1.8110  2.5 0.1377  251000 425000 22.0000 
6888 440 17.3228  540 21.2598  46 1.8110  2.5 0.0984  24.0000 
6892 460 18.1102  580 22.8346  56 2.2047  3 0.1181  33.5000 

What is the purpose of the bushing?

If you notice the truck making noises when cornering, the bushings may be worn. You may need to replace the ball joint or stabilizer bar, but a simple inspection will reveal that the noise is coming from the bushing. The noise from a worn bushing on a metal joint can mimic the sound of other problems in the suspension, such as a loose stabilizer bar or a failed ball joint.
bushing

Function

What is the purpose of the bushing? They play an important role in the operation of various mechanical parts. Their main functions include reducing the clearance between the shaft and the bearing and reducing the leakage of the valve. Bushings are used in different ways to ensure smooth operation and longevity. However, some new designers don’t appreciate the functionality of the case. So let’s discuss these features. Some of their most common applications are listed below.
First, the shell does a lot of things. They reduce noise, control vibration, and provide amazing protection for all kinds of industrial equipment. Large industrial equipment faces more wear, vibration and noise, which can render it completely inoperable. Bushings help prevent this by reducing noise and vibration. Bushing sets also extend equipment life and improve its performance. Therefore, you should not underestimate the importance of the casing in your device.
Another common function of bushings is to support components during assembly. In other words, the bushing reduces the risk of machine wear. In addition to this, they are superior to bearings, which are notoriously expensive to maintain. However, they are still useful, and their versatility cannot be overemphasized. If you’re considering installing one, you’ll be glad you did! These products have become a necessity in the modern industrial world. If you’re wondering how to choose one, here are some of the most common bushing uses.
Electrical bushings are an important part of many electrical equipment. They carry high voltage currents through the enclosure and provide an insulating barrier between live conductors and metal bodies at ground potential. They are made of a central conductive rod (usually copper or aluminum) and surrounding insulators made of composite resin silicone rubber. Additionally, the bushings are made of various materials. Whether copper, aluminum or plastic, they are an important part of many types of electrical equipment.

type

There are several different types of bushings on the market today. They may be cheap but they are of good quality. These products can be used in telephones, cable television, computer data lines and alarm systems. The key to buying these products online is finding the right appliance store and choosing a high-quality product. An online appliance store should have comprehensive information and ease of use. For the right electrical bushing, you should look for reliable online stores with the best prices and high quality products.
Capacitive grading bushings use conductive foils inserted into paper to stabilize the electric field and balance the internal energy of the bushing. The conductive foil acts as a capacitive element, connecting the high voltage conductor to ground. These types of bushings are sometimes referred to as capacitor grade bushings. Capacitive grading bushings are usually made of paper impregnated with epoxy resin or mineral oil.
When buying enclosures, you should know how they are used. Unlike ball bearings, bushings should be stored upright so that they are in the correct working position. This is because horizontal placement can cause air bubbles to form in the fill insulation. It is also important to store the bushing properly to prevent damage. The wrong way to store these components can result in costly repairs.
In addition to the physical structure, the bushing insulation must also be effective over the long term. It must resist partial discharge and working electric field stress. The material and design of the bushing can vary widely. Early on, porcelain-based materials were popular in bushing designs. Porcelain was chosen because of its low cost of production and very low linear expansion. Ceramic bushings, on the other hand, require a lot of metal fittings and flexible seals.
bushing

Durability

The RIG 3 Bushing Durability Test Standard simulates real-world service conditions for automotive bushings. This three-channel test standard varies casing loads and stresses by applying a range of different load conditions and various control factors. This test is critical to the durability of the case, as it accurately reproduces the dynamic loads that occur during normal use. This test is a key component of the automotive industry and is widely used in many industries.
The Advanced Casing Model has five modules to address asymmetry, nonlinearity, and hysteresis. This model also represents the CZPT lag model. The model can be parameterized in the time domain using MATLAB, and the results can be exported to other simulation software. The developed bushing model is a key component in the durability and performance of vehicle suspension components.
A conductive material is coated on the inner surface of the sleeve. The coating is chosen to conduct a certain amount of current. The conductive path extends from the blade spacer 126 to the sleeve projecting edge 204 and then through the housing 62 to the ground. The coating is made of a low friction material and acts as a wear surface against the bushing sidewall 212 and the housing 62 .
Another important factor in a bushing’s durability is its ability to friction. The higher the operating speed, the greater the load on the bushing. Since bushings are designed for lighter loads and slower speeds, they cannot handle large loads at high speeds. The P-max or V-max value of a bushing is its maximum load or speed at 0 rpm. The PV value must be lower than the manufacturer’s PV value.

price

If you need to replace the bushing on the control arm, you should understand the cost involved. This repair can be expensive, depending on the make and model of your car. Generally, you should pay between $105 and $180 for a replacement. However, you can choose to have it done by a mechanic at a lower cost. The labor cost for this job can be around $160, depending on your automaker.
The cost of replacing the control arm bushings can range from $200 on the low end to $500 on a luxury car. While parts are cheap, labor costs are the highest. Mechanics had to remove suspension and wheel assemblies to replace bushings. If you have some mechanical knowledge, you can replace the bushing yourself. Control arm bushings on the wheel side are usually about $20 each. Still, if you’re not a mechanic, you can save money by doing it yourself.
bushing

Install

Press-fit bushings are installed using a retaining ring with a diameter 0.3/0.4 mm larger than the inner diameter of the bushing. To ensure accurate installation, use a mechanically driven, pneumatic or hydraulic drill and insert the bushing into the appropriate hole. This process is best done using mounting holes with drilled holes for the clamps. Make sure the mounting hole is in the center of the bushing and free of debris.
Once the bushing is positioned, use a vise to install its nut. A cold bushing will compress and fit the shell better. Place the sleeve in the refrigerator for at least 24 hours to aid installation. After removing the bushing from the refrigerator, make sure it has enough diameter to fit into the enclosure. Next, place the opposite socket into the enclosure and use it as a stand. After a few minutes, the bushing should be fully seated in the housing.
Install the new bushing into the housing hole. If the previous one had a metal case, insert the new one through the taper. Always lubricate the inner and outer surfaces of the bushing. Then, apply pressure to the inner metal sleeve of the new bushing. You may notice that the new bushing does not exactly match the housing hole. However, that’s okay because the outer diameter of the bushing is larger than the outer diameter of the hub drive.
The installation of the bushing requires the use of the hydraulic unit 16 . Hydraulic unit 16 is located near the #1 journal of the camshaft and extends from #2 to #7. Hydraulic fluid forces piston 22 away from the outer end of cylinder 20 and pushes shaft 14 forward. The shaft is then moved forward, pushing the bushing 17 onto the piston. Multiple bushings can be installed in a single engine.

China Electric Scooter/Bicycle Ball Bearing Miniature/Thin Wall 6200 6900 6800     bearing driver kitChina Electric Scooter/Bicycle Ball Bearing Miniature/Thin Wall 6200 6900 6800     bearing driver kit
editor by czh 2022-11-24

Tapered Roller Bearing

As one of the leading tapered roller bearing manufacturers, suppliers, and exporters of mechanical products, We offer tapered roller bearing and many other products.

Please get in touch with us for details.

Mail:[email protected]

Manufacturer supplier exporter of tapered roller bearing.

Recent Posts